logo
Zhuzhou Sanxin Cemented Carbide Manufacturing Co., Ltd
Solicite um orçamento
Portuguese
English
French
German
Italian
Russian
Spanish
Portuguese
Dutch
Greek
Japanese
Korean
Arabic
Hindi
Turkish
Indonesian
Vietnamese
Thai
Bengali
Persian
Polish
Casa ProdutosProcessamento do carboneto de tungstênioYG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining
YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining
YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining

YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining

Detalhes do produto:
Lugar de origem: zhuzhou, China
Marca: Sanxin
Certificação: ISO 9001
Número do modelo: SX1274
Condições de Pagamento e Envio:
Quantidade de ordem mínima: 5
Tempo de entrega: 5-25 dias
Termos de pagamento: T/T, L/C, União Ocidental
contacto
  • Informação detalhada
  • Descrição de produto

Informação detalhada
Vida de serviço: Super durável Alta dureza: HRA92
Especificação da liga: Yg6/yg8/yg10x/yg20c Densidade: 150,63 g/cm3
Características: Excelente resistência ao desgaste e à corrosão Dureza: 9 Mohs
Tipo de negócio: fabricante Ponto de fusão: 2.870°C
Estabilidade dimensional: Alto Propriedades magnéticas: Disponível não magnético
Resistência Química: Resistente à maioria dos ácidos e álcalis Usinagem: Processamento de carburo de tungsténio
Resistência à Flexão: 1400 - 2100 MPA
Destacar:

±0.002mm Hole Spacing Accuracy Precision Fixture

,

YG8 Superhard Alloy Precision Fixture

,

Micron-level Precision Five-hole Coaxial Fixture

Descrição de produto

±0.002mm Hole Spacing Accuracy YG8 Superhard Alloy Micron-level Five-hole Coaxial Precision Fixture
The five-hole positioning seat, precision-manufactured using YG8 cemented carbide, utilizes five-hole coaxial precision machining technology and overall hardening treatment to provide a positioning solution with micron-level positioning accuracy, ultra-long service life, and excellent stability for multi-pin component testing and precision part assembly, completely solving industry pain points such as rapid wear, low accuracy, and short lifespan of traditional fixtures.
Material Properties
  • Base Material: YG8 cemented carbide (92% WC + 8% Co)
  • Physical Properties:
    • Hardness: 89.5 HRA
    • Density: 14.8 g/cm³
    • Bending Strength: 2200 MPa
  • Surface Treatment:
    • Mirror Polishing: Ra 0.2μm
    • Rust Prevention Treatment: Corrosion Resistance Grade ≥ 9
Application Areas
Semiconductor Testing
IC Chip Testing and Positioning Fixtures
Wafer Probe Card Positioning Bases
Microelectronic Component Testing Fixtures
Medical Devices
Surgical Instrument Assembly Fixtures
Medical Sensor Test Mounts
Precision Medical Device Positioning
Electronics Manufacturing
Connector Pin Testing Fixtures
PCB Board Positioning Fixtures
Micro-component Assembly and Positioning
Precision Instruments
Optical Instrument Adjustment Bases
Sensor Calibration Fixtures
Precision Measurement Positioning References
Quality Assurance
  • Raw Material Certification: YG8 Material Certificate
  • Process Control: IPQC Inspection at Every Stage
  • Finished Product Inspection:
    • 100% Full-Dimension Inspection
    • Aperture Accuracy Inspection with Pneumatic Gauge
    • Surface Roughness Inspection with White Light Interferometer
  • Traceability System: Unique Traceability Code for Each Product
  • Certification Standard: ISO 9001 Quality Management System Certification
YG8 Superhard Alloy Precision Fixture with ±0.002mm Hole Spacing Accuracy and Micron-level Five-hole Coaxial Machining 0

etiqueta:

peças do carboneto de tungstênio

produção do carboneto de tungstênio

Ferramentas de carboneto do tungstênio

Entre em contato conosco

Incorpore sua mensagem

Você pode estar nesses